INVENTORY CLEARANCE
Score incredible deals on high-quality products. Don’t delay — only good while supplies last!
Check back often to take advantage of new inventory clearance deals.
Jump to a location:
DFW | Central Montana | Central Oregon | Phoenix | Portland | Salt Lake City | Spokane | Tacoma
DFW
GOMAMAX Gasket Seal Gun Foam
Priced well below retail! Hurry — available only while supplies last!*
Location: DFW
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
One-component ready to use polyurethane gunfoam for sealing between framed walls and drywall. Fine cell structure enhances thermal and acoustic insulation properties and provides airtight sealing.
- Improves air tightness of the construction
- Dense, consistent and flexible foam structure
- Excellent movement capability
- Very low diisocyanate monomer content (<0,1%)
- High thermal and acoustic insulation value
Fields of Application:
- Sealing between drywall and framed walls
Application Instructions
Application conditions:
Air temperature during use: 41˚F to 86˚F. Make sure the ambient temperature stays within this range until the foam has fully cured.
Can temperature during application: 50˚F to 77˚F, best results at 68˚F.
Surface preparation
Remove dust, loose particles and oil stains from the surfaces.
Application method
Shake the can vigorously at least 20 times. Hold the foam can in upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun dial and trigger pressure.
Cleaning
Uncured foam can be removed with acetone, cured foam with mechanical means.
- Gomamax Gasket Seal is designed to be applied at the top plate to create a seal between the drywall and framing to reduce air infiltration from the attic or floor above. Application between the bottom plate and drywall, or the bottom plate to the floor (replacing caulk) is an option as well.
- ACH requirements are becoming more stringent every year with new codes going into effect. Gomamax Gasket Seal will provide a better result on blower door testing when properly applied.
- Gomamax Gasket Seal has elastic properties that allow it to stay attached to the lumber when drywall is slid over it. The rebounding properties allow it to fill in small gaps between the lumber and drywall.
GOMAMAX AC60 ACRYLIC LATEX CAULK
Priced well below retail! Hurry — available only while supplies last!*
Location: DFW
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
10.1 oz. tubes of Gomamax AC60 siliconized acrylic caulk. Color is white.
- Indoor / outdoor use
- Paintable
- Cures Flexible
- Easy Water Cleanup
- Great Adhesion
- Mold-Proof
- Solvent-Free
- No Bag
- Easy to Tool
- High Solids Content
- Very Low Shrinkage
Available by the tube, case (24 tubes), or palette (2,400 tubes).
CENTRAL MONTANA
ASC HT550 Hammer Tacker
Priced well below retail! Hurry — available only while supplies last!*
Location: Helena
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This lightweight, well-balanced tool is designed with unified trip-lever cam linkage. These features make one-handed stapling fast, easy, and smooth.
Features:
- Heavy duty, reliable tool
- Rear loading magazine
- Quick and easy jam clearing
- Two strip capacity
Works Great For:
- Construction
- Furniture
- Insulation
- Roofing
Product Specs
| Fastener Range | 5/32″ to 5/16″ |
| Wire Gauge | 20 |
| Wire Size | .05″ |
| Crown Width | 1/2″ |
| Load Capacity | 168 |
Uses These Fasteners:
- Duo-Fast/Paslode 5010-C Fine Wire Staples
- Duo-Fast/Paslode 5008-C Fine Wire Staples
Bostitch H30-6 Hammer Tacker
Priced well below retail! Hurry — available only while supplies last!*
Location: Helena
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
The Bostitch® PowerCrown™ Light Wire Hammer Tacker has a die-cast frame and hardened steel components to offer durability and with tool-free jam removal and a quick load magazine is convenient and easy to use.
Features:
- Die-cast frame and through hardened steel components for extreme durability
- Quick-load magazine
- Tool-free jam clearance
| Material | Die Cast Steel |
| Dimensions | 12″ in Length |
| Color | Yellow |
| Specifications | 84 Magazine Capacity, 1/4 to 3/8 in Fastener Length |
| Suitable For Use With | STCR2619 Fastener |
Bostitch H30-8 Hammer Tacker
Priced well below retail! Hurry — available only while supplies last!*
Location: Helena
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
The Bostitch® PowerCrown™ Hammer Tacker manual stapler is constructed with a die-cast frame and through hardened steel components for extreme durability. It features a quick-load magazine and tool-free jam clearing. A compact stapling tool that swings like a hammer with one-hand operation. For tacking and light nailing where speed is important.
Features:
- Die-cast frame and through hardened steel components for extreme durability
- Quick-load magazine
- Tool-free jam clearance
| Material | Die Cast Steel |
| Dimensions | 12″ in Length |
| Color | Black / Yellow |
| Specifications | 84 Magazine Capacity, 1/4 to 3/8 in Fastener Length |
| Suitable For Use With | STCR5019 PowerCrown™ Staples |
Insulation Fabrics ISF 50 Professional Insulation netting
Priced well below retail! Hurry — available only while supplies last!*
Location: Helena
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
Speed insulation application with convenient ISF (Insulation Support Fabrics) 50 Professional from Insulation Fabrics for Net & Blow or wet spray insulation on ceilings, walls and floor joists prior to covering with sheetrock. The 100% polypropylene, breathable, room-size rolls are professional grade (1.33 oz. per sq. yd.) with superior tensile strength – available in ready-cut sizes to fit most commercial and residential installations.
Available Sizes:
- 8 ft. 2 in. x 375 ft.
- 9 ft. 4 in. x 375 ft.
- 10 ft. 2 in. x 375 ft.
| Material | 100% Polypropylene, Economical, Lightweight |
| Basis Weight / Grade | ISF 50 Professional – 1.33 oz. per sq. yd. |
| High Tensile Strength | No stretching or sagging during application |
| Available Widths |
|
| Roll Length | 375 ft. |
CENTRAL OREGON
Honeywell Sperian Saf-T-Fit Plus N95 Disposable Respirator, 20 pack
Priced well below retail! Hurry — available only while supplies last!*
Location: Central Oregon
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
The Honeywell NIOSH-Approved N95 Respirator Mask for Airborne Particulates provides 95% filter efficiency against solid and liquid particulates in the air (excluding oils). Lightweight, easy-to-wear and disposable, N95 masks features a latex-free filter media for lower breathing resistance. The breathing mask’s filter media is designed to resist humidity for comfortable performance in most environments. The two-strap construction allows for quick donning, while the adjustable nose bridge means one size will fit most faces. This face mask is an N class respirator that is NIOSH approved for use with solid and liquid particulates, excluding oils. Each package includes (twenty) disposable N95 respirators.
- NIOSH-Approved N95 Protection for home & work applications
- 95% filter efficiency against solid and liquid particulates, excluding oils
- Humidity-resistant filter media
- Adjustable nose bridge
- Nose clip is color-coded for visible size recognition
- Durable suspension straps
- Lightweight molded cup design
| Standards | NIOSH Approved |
| Filtration Type | N95 |
| Mask Type | Molded Cup |
| Latex Free | Yes |
| UPC | 040025540037 |
| MPN | RWS-54003 |
| Category | Respirators and Gas Masks |
Flex-Grip 550 mastic 1-gallon pail
Priced well below retail! Hurry — available only while supplies last!*
Location: Central Oregon
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible to save call-back labor. Flex-Grip 550’s excellent coverage rates and easy brush-on application provide low installed cost.
- UL 181 B-M Listed
- Passes ASTM C-731, ASTM D-2202
- USDA, EPA and FDA Approved
- LEED compliant
- SCAQMD Rule 1168
- City of Los Angeles Approval RR #8069
6' Wood Lath – Bundle of 50
Priced well below retail! Hurry — available only while supplies last!*
Location: Central Oregon
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This 50-piece wood lath bundle provides an economical solution to a variety of residential uses. Perfect for door shims, furring strips, crate framing, for installing window insulating film, surveyor or marking stakes. Also makes excellent campfire kindling.
Also available in palettes of 60 50-piece bundles.
Features:
- Net size of 3/8″ x 1 1/2″ x 72″
- Species may vary
- Ideal for using as land markers and miscellaneous projects
- Kiln dried
- Can be painted or stained
Cloth Stucco Duct Tape
Priced well below retail! Hurry — available only while supplies last!*
Location: Central Oregon
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This premium grade, 7-day cloth, stucco duct tape is designed for stucco applications. Used to protect vinyl windows, profiles, and door frames, the stucco duct tape has superior holding power and leaves limited residue if removed within seven days.
Available by roll; case of 24 rolls; or palette of 576 rolls.
COMMON APPLICATIONS
The most common applications for the 7-day stucco duct tape include:
- protects door frames, vinyl windows, and profiles during outdoor stucco application
- used for one-coat stucco processes
FEATURES OF THE TAPE
Features include:
- strong holding power and durability (prevents lifting)
- doesn’t leave residue (if removed within 7 days)
- conforms to uneven surfaces
- can tear the tape by hand (leaving a clean, straight edge)
- easy to apply (doesn’t curl or splinter)
TAPE ADHESIVE
The tape has a high-performance rubber adhesive.
WEATHER RESISTANCE
The 7-day stucco duct tape is weather resistant:
- can be used indoors and outdoors
- outstanding UV resistance (lasting up to 7 days)
TAPE SIZES
The 7-day stucco duct tape is available in the following size:
- 2 inches by 60 yards / 48 mm by 55 m
TAPE COLORS
The 7-day stucco duct tape is available in blue or red.
WHO USES THE TAPE
The tape is most commonly used by:
- stucco contractors
- painting contractors
Sizes | 1.89 in x 60 yd | 48 mm x 55 m |
Carrier | Waterproof Polyethylene Coated Cloth |
Adhesive | Rubber |
Total Thickness | 9.5 mils |
Tensile | 25 lbs/in |
Adhesion | 22 oz/in |
Color | Blue (CL-W6045) or Red (CL-W6089) |
Industrial Strength Utility Grade Duct Tape
Priced well below retail! Hurry — available only while supplies last!*
Location: Central Oregon
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This industrial-strength duct tape is no ordinary duct tape! Made with an advanced adhesive technology, the duct tape provides superior holding power, yet is easy to tear and apply. This heavy-duty duct tape sticks well to smooth and rough surfaces, and it can be used for holding, seaming, repairing, and bundling.
Available by the roll or case (24 rolls).
Applications For the Tape
The most common applications for the industrial duct tape include:
- temporary holding and bonding
- general purpose use and repair
- hanging and patching polyethylene sheeting
- duct work
- bundling
- color coding
- applications in manufacturing and industrial environments
Features Of the Tape
Features of the industrial duct tape include:
- aggressive adhesive
- superior holding power
- sticks well to a wide variety of smooth and rough surfaces
- conforms to uneven surfaces
- can tear the tape by hand (leaving a clean, straight edge)
- unwinds smoothly (making it easier to apply)
- tape lays flat (no twisting or curling)
Tape Adhesive
The tape has a high-performance rubber adhesive.
Tape Sizes
The industrial duct tape is available in the following size:
- 2 inches by 60 yards / 48 mm by 55 m
Tape Colors
The industrial duct tape is available in silver, and red.
Who Uses the Tape
The tape is most commonly used by:
- construction professionals
- HVAC contractors
- contractors
| Sizes | 24mm – 96mm x 55m |
| Carrier | Polyethylene Coated Cloth |
| Adhesive | Synthetic Rubber |
| Total Thickness | 7 mils |
| Tensile | 17 lbs/in |
| Adhesion | 65 oz/in |
| Elongation | 12% |
| Color | Silver and Red |
STI LCI320 Fire Rated Intumescent Sealant - 20 Oz Tubes
Priced well below retail! Hurry — available only while supplies last!*
Location: Central Oregon
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
SpecSeal LCI Firestop Sealant is a water-based intumescent sealant intended for a wide range of through-penetration and construction joint applications. SpecSeal LCI Sealant has excellent caulking properties making it easy to apply in vertical applications as well as overhead.
Can be purchased by individual tube; case (12 tubes); or palette (780 tubes).
- Gun Grade material
- Tested for use in through-penetration and construction joint configurations
- Compatible with CPVC Piping
- Can be sanded and painted to match its surroundings
- Used in over 500 UL Tested Systems
| Property | Value |
| Flame Spread | 0* |
| Smoke Development | 0* |
| Mold & Fungus Growth Rating (ASTM G21) | 0 |
| In Service Temperature | Less than or equal to 185°F (85°C) |
| STC Rating (ASTM E90-04/ASTM C919) | Less than or equal to 185°F (85°C) |
| VOC Content | Less than or equal to 185°F (85°C) |
| Expansion Begins | 350°F (177°C) |
| Average Volume Shrinkage (ASTM C1241) | 21.1% |
| Volume Expansion | 10x Free Expansion |
| Shelf Life From Date of Manufacture | 24 months |
| Notes | *Tested to ASTM E84 (UL723) at 14% surface coverage (modified test for sealants and caulks) **Per SCAQMD Rule 1168 (EPA Method 24) |
SpecSeal LCC Intumescent Firestop Collar
Priced well below retail! Hurry — available only while supplies last!*
Location: Central Oregon
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
SpecSeal LCC Firestop Collars are factory-manufactured firestop devices sized to plastic pipes of up to 4 in. Trade Size. LCC Collars consist of a restraining collar with a factory applied intumescent ensuring the correct amount of material is applied every time. Simplify the process of firestopping combustible piping by taking the guess work out of estimation with SpecSeal LCC Firestop Collars.
Sizes available for inventory clearance pricing: 2.0″, 3.0″, and 4.0″
- Rapid expansion – closes off burning pipes quickly
- Small profile – use it in all the tight spots
- Flexible & durable – no loose flakes (eye hazards)
- Water resistant – no water soluble or hygroscopic ingredients
- Economical – lower installed cost
- High volume char – expands up to 60 times,
| Property | Value |
| Available Sizes | 2″ (51mm), 3″ (76mm), 4″ (102mm) |
| Shell Construction | Galvanized Steel |
| Expansion Begins | 320°F (160°C) |
| Volume Expansion | 32x to 64x (free expansion) |
| In Service Temperature | Less Than 120°F (49°C) |
| Shelf Life | Limit |
50 Gal. Contractor Bags
Priced well below retail! Hurry — available only while supplies last!*
Location: Central Oregon
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
CWC low density garbage bags are more stretchable and give more easily than high density bags because they are made from resins that are highly resistant to puncturing and tearing. These bags offer excellent toughness and a star-seal bottom for easier weight distribution and removal.
20 bags per box.
- Color: grey
- Ideal for recycling
| Width | 32″ |
| Height | 50″ |
| Capacity | 40-45 Gallon |
| Thickness | 3 mil |
| Color | Grey |
| Units/Carton | 20 |
| Weight | 7 lbs. |
| Manufacturer | Continental Western Corporation |
Heavy Duty FORCE® SHIELD Coveralls
Priced well below retail! Hurry — available only while supplies last!*
Location: Central Oregon
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
Heavy Duty FORCE® SHIELD Coveralls provide splash proof protection to insulation installers.
Intec’s Professional Duty Coveralls are produced from 45 gsm microporous bonded fabric and meet performance requirements for protective clothing against liquid chemicals, protective clothing for use against solid particulates, and electrostatic dissipative protection clothing.
Certifications include:
- EN ISO 13688:2013
- EN 13034:2005+ A1:2009
- EN ISO 13982-1:2004+ A1:2010
- EN 14523:2004
- EN 1149-5:2018
- EN ISO 13982-1 Type 5
- EN 13034 Type 6
- 55gsm microporous fabric
- All Intec FORCE® SHIELD coveralls are disposable
- includes hood
- includes zippered front
ECHOtape 1/8" x 3" Single Sided Thermal Break Tape – 75 ft. roll
Priced well below retail! Hurry — available only while supplies last!*
Location: Redmond
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This 1/8 in. thick single-sided thermal break tape (FO-V2348) is designed to reduce thermal bridging on outer and inner framing in metal buildings. The tape has excellent holding power and high-load capability.
The most common applications include:
- create a vapor seal where large gaps occur
- create a lap joint seal on corrugated metal building panels or prefabricated wall panels
- create a flash break on building purlins and girt flanges
- maintain a seal in high movement joints
Features of the single-sided thermal break tape include:
- adheres strongly to smooth and rough surfaces (including corrugated metal)
- easy to apply
- sticks quickly (which speeds up application)
- conforms well to irregular surfaces
- easy to die-cut for custom sizing
- the paper release liner protects the adhesive from contaminants when cutting the tape to specific lengths
The tape has an acrylic adhesive.
The single-sided thermal break tape is available in gray.
The tape is most commonly used by:
- construction professionals
- building contractors
- insulation contractors
- metal building specialists
| Adhesive | Acrylic |
| Total Thickness | 1/8″ |
| Tensile | 60 PSI |
| Adhesion | 20 oz/in |
| Service Temperature | -20°F to 130°F |
| Elongation | 120% |
| Color | Gray |
| Compression Deflection | 5 PSI |
| R Value | .576 |
| Holding Power | >24 hours @ 2.2 psi load, R.T. |
ECHOtape 1/4" x 3/8" Single Sided Weather Stripping / vinyl foam tape – 50 ft. roll
Priced well below retail! Hurry — available only while supplies last!*
Location: Redmond
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This 1/4 in. thick single-sided thermal break tape (FO-V2344) is designed to reduce thermal bridging on outer and inner framing in metal buildings. The tape has excellent holding power and high-load capability.
The most common applications include:
- create a vapor seal where large gaps occur
- create a lap joint seal on corrugated metal building panels or prefabricated wall panels
- create a flash break on building purlins and girt flanges
- maintain a seal in high movement joints
Features of the single-sided thermal break tape include:
- adheres strongly to smooth and rough surfaces (including corrugated metal)
- easy to apply
- sticks quickly (which speeds up application)
- conforms well to irregular surfaces
- easy to die-cut for custom sizing
- the paper release liner protects the adhesive from contaminants when cutting the tape to specific lengths
The tape has an acrylic adhesive.
The single-sided thermal break tape is available in gray.
The tape is most commonly used by:
- construction professionals
- building contractors
- insulation contractors
- metal building specialists
| Adhesive | Acrylic |
| Total Thickness | 1/4″ |
| Tensile | 60 PSI |
| Adhesion | 20 oz/in |
| Service Temperature | -20°F to 130°F |
| Elongation | 120% |
| Color | Gray |
| Compression Deflection | 5 PSI |
| R Value | 1.15 |
| Holding Power | >24 hours @ 2.2 psi load, R.T. |
STI CS3641 36" x 41" composite sheet
Priced well below retail! Hurry — available only while supplies last!*
Location: Redmond
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
STI SpecSeal Composite Sheet is the ideal solution for large openings where a permanent seal is required. Composite sheet consists of a thin sheet steel with intumescent embedded onto a single side. Composite sheet partners with other SpecSeal firestop products such as Firestop Collars and EZ Path Devices to size down oversized openings.
- Professional Fit and Finish
- Partners with other SpecSeal Firestop Products
- Easily cut with hand sheers
- Tested for up to 4 Hours of fire resistance when tested to ASTM E814 (UL1479)
- Permanent
- Finished Product
- Intumescent
- Light Weight
- Low VOC
- No Expiration
- Paintable
- Re-Enterable
- STC Rating
- Smoke Barrier
Third Party Approvals:
- UL Certified
- FM Approved
| Nominal Thickness | .1 in (2.5 mm) |
| Nominal Weight | 1.4 lb/sq ft (6.9 kg/sq m) Intumescent |
| Expansion Begins | 350°F (177°C) |
| Volume Expansion | 15x (typical free expansion) |
| In Service Temperature | -10°F (-23°C) – 130°F (54°C) |
| Storage Temperature | Less than 130°F (54°C) |
| Radiation Exposure | Unaffected |
| STC Rating | 55 (Relates to specific construction) (ASTM E 90-04) |
| VOC Content | N/A |
| Shelf Life | No Limit |
GOMAMAX Gasket Seal Gun Foam
Priced well below retail! Hurry — available only while supplies last!*
Location: Redmond
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
One-component ready to use polyurethane gunfoam for sealing between framed walls and drywall. Fine cell structure enhances thermal and acoustic insulation properties and provides airtight sealing.
- Improves air tightness of the construction
- Dense, consistent and flexible foam structure
- Excellent movement capability
- Very low diisocyanate monomer content (<0,1%)
- High thermal and acoustic insulation value
Fields of Application:
- Sealing between drywall and framed walls
Application Instructions
Application conditions:
Air temperature during use: 41˚F to 86˚F. Make sure the ambient temperature stays within this range until the foam has fully cured.
Can temperature during application: 50˚F to 77˚F, best results at 68˚F.
Surface preparation
Remove dust, loose particles and oil stains from the surfaces.
Application method
Shake the can vigorously at least 20 times. Hold the foam can in upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun dial and trigger pressure.
Cleaning
Uncured foam can be removed with acetone, cured foam with mechanical means.
- Gomamax Gasket Seal is designed to be applied at the top plate to create a seal between the drywall and framing to reduce air infiltration from the attic or floor above. Application between the bottom plate and drywall, or the bottom plate to the floor (replacing caulk) is an option as well.
- ACH requirements are becoming more stringent every year with new codes going into effect. Gomamax Gasket Seal will provide a better result on blower door testing when properly applied.
- Gomamax Gasket Seal has elastic properties that allow it to stay attached to the lumber when drywall is slid over it. The rebounding properties allow it to fill in small gaps between the lumber and drywall.
18GA, 3/8" Crown, 3/4" Length Unicatch M19 Staples
Priced well below retail! Hurry — available only while supplies last!*
Location: Redmond
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
| Item # | 87519 |
| Desc. | M19 |
| Shank Diameter | 18GA |
| Crown Width | 3/8″ |
| Length | 3/4″ |
| Staples per Box | 5,000 |
Interchangeable with: Senco
PHOENIX
AP Foil-faced polyiso foam sheathing
Priced well below retail! Hurry — available only while supplies last!*
Available clearance sizes: 2″ (R13) | 3″ (R19) | 3.5″ (R22)
Sheets are 48″ x 96″.
Location: Phoenix
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
AP™ Foil-Faced Polyiso Foam Continuous Insulation provides maximum efficiency, as well as exceptional moisture, heat and air control. It features a reflective foil facer on one side and a nonreflective facer on the other.
GREAT FOR:
- Interior and exterior walls
- Ceilings
- Crawlspaces
Learn more: Johns Manville Foam Board Video
| Thickness | R-Value | Size |
| 2″ | R13 | 2″ x 48″ x 96″ |
| 3″ | R19 | 3″ x 48″ x 96″ |
| 3.5″ | R22 | 3.5″ x 48″ x 96″ |
CI Max Foam Sheathing
Priced well below retail! Hurry — available only while supplies last!*
Available clearance sizes: 1″ (R6) | 2″ (R13) | 2.5″ (R16) | 3″ (R19) | 4″ (R26)
Sheets are 48″ x 96″.
Location: Phoenix
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
Johns Manville CI Max® Polyiso Foam Continuous Insulation is available in R-Values up to R-26 and provides a layer of insulation to reduce thermal bridging and improve energy efficiency. CI Max Continuous Insulation is designed for exposed interior applications and is approved for use without a thermal barrier. It is suitable for wall or ceiling applications in residential, commercial, agricultural and industrial buildings.
ADVANTAGES:
Thermally Efficient: Effective resistance to heat transfer, with R-values up to R-26.
Vapor Barrier: Maintains a minimum thickness of one inch and qualifies as a Class I vapor retarder.
Lightweight: Easy to handle and may be cut with a utility knife or saw.
Learn more: Johns Manville Foam Board Video
Sheets are 48″ x 96″.
| ASTM Standards | ASTM C1289 | Type I, Class 1 |
| Flame Spread | ASTM E84 | 4″: ≤ 25 |
| Smoke Development | ASTM E84 | ≤ 450 |
| Water Vapor Transmission | ASTM E96 | 0.02 perms (1.4 ng/Pa-s-m2) |
| Compressive Strength | ASTM D1621 | ≥ 16 psi (110 kPa) |
| Water Absorption | ASTM C209 | < 0.6% volume |
| Service Temperature | -100 to 250°F | |
| R-Value Per Inch | 6.0 |
GOMAMAX AC60 ACRYLIC LATEX CAULK
Priced well below retail! Hurry — available only while supplies last!*
Location: Phoenix
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
10.1 oz. tubes of Gomamax AC60 siliconized acrylic caulk. Color is white.
- Indoor / outdoor use
- Paintable
- Cures Flexible
- Easy Water Cleanup
- Great Adhesion
- Mold-Proof
- Solvent-Free
- No Bag
- Easy to Tool
- High Solids Content
- Very Low Shrinkage
Available by the tube, case (24 tubes), or palette (2,400 tubes).
PORTLAND
A. O. Smith ProLine XE® Voltex® 50-Gallon Hybrid Electric Heat Pump Water Heater
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
Note: The new hybrid electric water heaters we are selling at inventory clearance prices do not have the CTA module that sends data to your local energy utility. Based on their manufacture date, they are not subject to this new requirement. They are fully functional and legal to use.
- Delivers 66-gallon first hour rating
- ENERGY STAR® certified, reduces water heating costs by up to 73% compared to standard electric technology
- Save up to $311 per year or $3,000 over 10 years in energy costs compared to standard electric technology
- Highly efficient performance offsets 2.9 metric tons of greenhouse gas emissions per year
- With up to a 3.45 Uniform Energy Factor (UEF) rating, heat pump technology is the most efficient water heating technology
- User-friendly electronic interface allows easy control of temperature setting, operating modes and communicates diagnostics.
- Choose from Hybrid, Efficiency, Electric or Vacation modes to meet your water heating needs
- Quiet operation at 51 decibels
- 10-year limited tank and parts warranty
The Voltex® Hybrid Electric Heat Pump reduces water heating cost by up to 73% through an innovative design that pulls environmental heat while dehumidifying and cooling the ambient air at the same time. This heat pump technology delivers tremendous savings by generating heat through the heat pump technology instead of the heating elements. It offers premium features including a user-friendly display, vacation mode to save money while you are away, and a heavy duty anode that protects your tank for 10 years. In addition to the heat pump technology, this model also has two heating elements that help the water heater recover quickly during periods of high demand. This Heat Pump is Northwest Energy Efficiency Alliance (NEEA) qualified. This ProLine® XE water heater is designed with A. O. Smith’s superior commercial-grade tank protection. Advanced tank features include stainless steel CoreGard™ anode rod, Blue Diamond® glass lining and DynaClean™ automatic sediment-cleaning system, all designed to help protect the tank from the corrosive effects of water and extend the life of the water heater. All of these features are accompanied by a 10-year limited tank warranty. A. O. Smith’s ProLine® water heaters are residential products built to commercial-grade standards and are only available for purchase through professional wholesalers and contractors. ProLine® XE models feature versatile high efficiency technologies.
Technical Specifications
| Nominal Gallon Capacity | 50 Gallons |
| Rated Storage Volume | 46 Gallons |
| UEF | 3.45 |
| Power Source | ELECTRIC |
| Limited Tank Warranty | 10 Years |
| Limited Parts Warranty | 10 Years |
| T&P Relief Valve | Yes |
| Water Connection Location | SIDE |
| Water Connection Size | 0.75″ |
| First Hour Rating | 66 Gallons |
| ASME Certified | No |
| NEEA Certified | true |
| Amperes | 23.6 |
| Digital Display | true |
| ENERGY STAR® Certified | true |
| Height to T&P | 40.75 |
| Installation Type | INDOOR |
| Max Wattage | 4,500 |
| Number of Elements | 2 |
| Application | RESIDENTIAL |
| Product Tier | ProLine® XE |
| Shipping Height | 65″ |
| Shipping Length | 28.06″ |
| Shipping Width | 26.31″ |
| Side Loop | No |
| Voltage | 208 – 240 |
Dimensions & Venting
| Type | Water Heater |
| Height | 63″ |
| Diameter | 22″ |
| Width | 22″ |
| Shipping Weight | 196 lbs. |
Rheem PRO H50 50-Gallon Hybrid Electric Heat Pump Water Heater
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
Note: The new hybrid electric water heaters we are selling at inventory clearance prices do not have the CTA module that sends data to your local energy utility. Based on their manufacture date, they are not subject to this new requirement. They are fully functional and legal to use.
Designed to Maximize Energy Design Rating/HERS Rating.
Rheem’s Hybrid Builder 50-Gallon 208/240 Volt 1-Phase Electric Water Heater delivers hot water faster than most standard electric water heaters with an efficiency rating of 3.50 UEF to reduce operating costs. The water heater is Energy Star rated and Title 24 Compliant (JA13 ready).
The Hybrid Builder installs easily even in confined spaced with minimal make up air required. It offers easy access with a side water connection and top electric junction box connections – zero clearance is needed in the back or side of the unit. The residential electric water heater also features integrated EcoNet WiFi-connected technology and a free mobile app that gives users control over the water heater, allowing for customizable temperature, vacation settings, energy savings and system monitoring at home or away.
- Water capacity: 50 gallons
- 30 amp, 208/240 volts
- Energy efficiency: 3.50 UEF
- Integrated WiFi
- Meets NEEA Tier 3 Requirements
- California Title 24 Compliant (JA13 Ready)
- Design certified to NSF/ANSI 372 (lead control)
- 3/4″ NPT water inlet & outlet, 3/4″ condensate drain connections
- EcoNet Smart Technology with integrated WiFi
- 10-year limited warranty
| Application Type | Residential |
| Product Type | Heat Pump |
| Fuel | Electric |
| Tank Capacity | 50 Gallons |
| Style | WIFI BM |
| Efficiency | 3.50UEF |
| Voltage | 208/240V |
| Amperage | 30AMP |
| Phase | 1 Phase |
| Inlet/Outlet Connection | 3/4″ |
| Warranty | 10 Year |
| Height | 61.75″ |
| Diameter | 22.25″ |
| Shipping Weight | 193 lbs. |
ECHOtape 1/8" x 3" Single Sided Thermal Break Tape – 75 ft. roll
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This 1/8 in. thick single-sided thermal break tape (FO-V2348) is designed to reduce thermal bridging on outer and inner framing in metal buildings. The tape has excellent holding power and high-load capability.
The most common applications include:
- create a vapor seal where large gaps occur
- create a lap joint seal on corrugated metal building panels or prefabricated wall panels
- create a flash break on building purlins and girt flanges
- maintain a seal in high movement joints
Features of the single-sided thermal break tape include:
- adheres strongly to smooth and rough surfaces (including corrugated metal)
- easy to apply
- sticks quickly (which speeds up application)
- conforms well to irregular surfaces
- easy to die-cut for custom sizing
- the paper release liner protects the adhesive from contaminants when cutting the tape to specific lengths
The tape has an acrylic adhesive.
The single-sided thermal break tape is available in gray.
The tape is most commonly used by:
- construction professionals
- building contractors
- insulation contractors
- metal building specialists
| Adhesive | Acrylic |
| Total Thickness | 1/8″ |
| Tensile | 60 PSI |
| Adhesion | 20 oz/in |
| Service Temperature | -20°F to 130°F |
| Elongation | 120% |
| Color | Gray |
| Compression Deflection | 5 PSI |
| R Value | .576 |
| Holding Power | >24 hours @ 2.2 psi load, R.T. |
ECHOtape 1/4" x 3/8" Single Sided Weather Stripping / vinyl foam tape – 50 ft. roll
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This 1/4 in. thick single-sided thermal break tape (FO-V2344) is designed to reduce thermal bridging on outer and inner framing in metal buildings. The tape has excellent holding power and high-load capability.
The most common applications include:
- create a vapor seal where large gaps occur
- create a lap joint seal on corrugated metal building panels or prefabricated wall panels
- create a flash break on building purlins and girt flanges
- maintain a seal in high movement joints
Features of the single-sided thermal break tape include:
- adheres strongly to smooth and rough surfaces (including corrugated metal)
- easy to apply
- sticks quickly (which speeds up application)
- conforms well to irregular surfaces
- easy to die-cut for custom sizing
- the paper release liner protects the adhesive from contaminants when cutting the tape to specific lengths
The tape has an acrylic adhesive.
The single-sided thermal break tape is available in gray.
The tape is most commonly used by:
- construction professionals
- building contractors
- insulation contractors
- metal building specialists
| Adhesive | Acrylic |
| Total Thickness | 1/4″ |
| Tensile | 60 PSI |
| Adhesion | 20 oz/in |
| Service Temperature | -20°F to 130°F |
| Elongation | 120% |
| Color | Gray |
| Compression Deflection | 5 PSI |
| R Value | 1.15 |
| Holding Power | >24 hours @ 2.2 psi load, R.T. |
Honeywell Sperian Saf-T-Fit Plus N95 Disposable Respirator, 20 pack
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
The Honeywell NIOSH-Approved N95 Respirator Mask for Airborne Particulates provides 95% filter efficiency against solid and liquid particulates in the air (excluding oils). Lightweight, easy-to-wear and disposable, N95 masks features a latex-free filter media for lower breathing resistance. The breathing mask’s filter media is designed to resist humidity for comfortable performance in most environments. The two-strap construction allows for quick donning, while the adjustable nose bridge means one size will fit most faces. This face mask is an N class respirator that is NIOSH approved for use with solid and liquid particulates, excluding oils. Each package includes (twenty) disposable N95 respirators.
- NIOSH-Approved N95 Protection for home & work applications
- 95% filter efficiency against solid and liquid particulates, excluding oils
- Humidity-resistant filter media
- Adjustable nose bridge
- Nose clip is color-coded for visible size recognition
- Durable suspension straps
- Lightweight molded cup design
| Standards | NIOSH Approved |
| Filtration Type | N95 |
| Mask Type | Molded Cup |
| Latex Free | Yes |
| UPC | 040025540037 |
| MPN | RWS-54003 |
| Category | Respirators and Gas Masks |
STI CS3641 36" x 41" composite sheet
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
STI SpecSeal Composite Sheet is the ideal solution for large openings where a permanent seal is required. Composite sheet consists of a thin sheet steel with intumescent embedded onto a single side. Composite sheet partners with other SpecSeal firestop products such as Firestop Collars and EZ Path Devices to size down oversized openings.
- Professional Fit and Finish
- Partners with other SpecSeal Firestop Products
- Easily cut with hand sheers
- Tested for up to 4 Hours of fire resistance when tested to ASTM E814 (UL1479)
- Permanent
- Finished Product
- Intumescent
- Light Weight
- Low VOC
- No Expiration
- Paintable
- Re-Enterable
- STC Rating
- Smoke Barrier
Third Party Approvals:
- UL Certified
- FM Approved
| Nominal Thickness | .1 in (2.5 mm) |
| Nominal Weight | 1.4 lb/sq ft (6.9 kg/sq m) Intumescent |
| Expansion Begins | 350°F (177°C) |
| Volume Expansion | 15x (typical free expansion) |
| In Service Temperature | -10°F (-23°C) – 130°F (54°C) |
| Storage Temperature | Less than 130°F (54°C) |
| Radiation Exposure | Unaffected |
| STC Rating | 55 (Relates to specific construction) (ASTM E 90-04) |
| VOC Content | N/A |
| Shelf Life | No Limit |
GOMAMAX Gasket Seal Gun Foam
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
One-component ready to use polyurethane gunfoam for sealing between framed walls and drywall. Fine cell structure enhances thermal and acoustic insulation properties and provides airtight sealing.
- Improves air tightness of the construction
- Dense, consistent and flexible foam structure
- Excellent movement capability
- Very low diisocyanate monomer content (<0,1%)
- High thermal and acoustic insulation value
Fields of Application:
- Sealing between drywall and framed walls
Application Instructions
Application conditions:
Air temperature during use: 41˚F to 86˚F. Make sure the ambient temperature stays within this range until the foam has fully cured.
Can temperature during application: 50˚F to 77˚F, best results at 68˚F.
Surface preparation
Remove dust, loose particles and oil stains from the surfaces.
Application method
Shake the can vigorously at least 20 times. Hold the foam can in upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun dial and trigger pressure.
Cleaning
Uncured foam can be removed with acetone, cured foam with mechanical means.
- Gomamax Gasket Seal is designed to be applied at the top plate to create a seal between the drywall and framing to reduce air infiltration from the attic or floor above. Application between the bottom plate and drywall, or the bottom plate to the floor (replacing caulk) is an option as well.
- ACH requirements are becoming more stringent every year with new codes going into effect. Gomamax Gasket Seal will provide a better result on blower door testing when properly applied.
- Gomamax Gasket Seal has elastic properties that allow it to stay attached to the lumber when drywall is slid over it. The rebounding properties allow it to fill in small gaps between the lumber and drywall.
18GA, 3/8" Crown, 3/4" Length Unicatch M19 Staples
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
| Item # | 87519 |
| Desc. | M19 |
| Shank Diameter | 18GA |
| Crown Width | 3/8″ |
| Length | 3/4″ |
| Staples per Box | 5,000 |
Interchangeable with: Senco
Flex-Grip 550 mastic 1-gallon pail
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible to save call-back labor. Flex-Grip 550’s excellent coverage rates and easy brush-on application provide low installed cost.
- UL 181 B-M Listed
- Passes ASTM C-731, ASTM D-2202
- USDA, EPA and FDA Approved
- LEED compliant
- SCAQMD Rule 1168
- City of Los Angeles Approval RR #8069
6' Wood Lath – Bundle of 50
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This 50-piece wood lath bundle provides an economical solution to a variety of residential uses. Perfect for door shims, furring strips, crate framing, for installing window insulating film, surveyor or marking stakes. Also makes excellent campfire kindling.
Also available in palettes of 60 50-piece bundles.
Features:
- Net size of 3/8″ x 1 1/2″ x 72″
- Species may vary
- Ideal for using as land markers and miscellaneous projects
- Kiln dried
- Can be painted or stained
Cloth Stucco Duct Tape
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This premium grade, 7-day cloth, stucco duct tape is designed for stucco applications. Used to protect vinyl windows, profiles, and door frames, the stucco duct tape has superior holding power and leaves limited residue if removed within seven days.
Available by roll; case of 24 rolls; or palette of 576 rolls.
COMMON APPLICATIONS
The most common applications for the 7-day stucco duct tape include:
- protects door frames, vinyl windows, and profiles during outdoor stucco application
- used for one-coat stucco processes
FEATURES OF THE TAPE
Features include:
- strong holding power and durability (prevents lifting)
- doesn’t leave residue (if removed within 7 days)
- conforms to uneven surfaces
- can tear the tape by hand (leaving a clean, straight edge)
- easy to apply (doesn’t curl or splinter)
TAPE ADHESIVE
The tape has a high-performance rubber adhesive.
WEATHER RESISTANCE
The 7-day stucco duct tape is weather resistant:
- can be used indoors and outdoors
- outstanding UV resistance (lasting up to 7 days)
TAPE SIZES
The 7-day stucco duct tape is available in the following size:
- 2 inches by 60 yards / 48 mm by 55 m
TAPE COLORS
The 7-day stucco duct tape is available in blue or red.
WHO USES THE TAPE
The tape is most commonly used by:
- stucco contractors
- painting contractors
Sizes | 1.89 in x 60 yd | 48 mm x 55 m |
Carrier | Waterproof Polyethylene Coated Cloth |
Adhesive | Rubber |
Total Thickness | 9.5 mils |
Tensile | 25 lbs/in |
Adhesion | 22 oz/in |
Color | Blue (CL-W6045) or Red (CL-W6089) |
Industrial Strength Utility Grade Duct Tape
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This industrial-strength duct tape is no ordinary duct tape! Made with an advanced adhesive technology, the duct tape provides superior holding power, yet is easy to tear and apply. This heavy-duty duct tape sticks well to smooth and rough surfaces, and it can be used for holding, seaming, repairing, and bundling.
Available by the roll or case (24 rolls).
Applications For the Tape
The most common applications for the industrial duct tape include:
- temporary holding and bonding
- general purpose use and repair
- hanging and patching polyethylene sheeting
- duct work
- bundling
- color coding
- applications in manufacturing and industrial environments
Features Of the Tape
Features of the industrial duct tape include:
- aggressive adhesive
- superior holding power
- sticks well to a wide variety of smooth and rough surfaces
- conforms to uneven surfaces
- can tear the tape by hand (leaving a clean, straight edge)
- unwinds smoothly (making it easier to apply)
- tape lays flat (no twisting or curling)
Tape Adhesive
The tape has a high-performance rubber adhesive.
Tape Sizes
The industrial duct tape is available in the following size:
- 2 inches by 60 yards / 48 mm by 55 m
Tape Colors
The industrial duct tape is available in silver, and red.
Who Uses the Tape
The tape is most commonly used by:
- construction professionals
- HVAC contractors
- contractors
| Sizes | 24mm – 96mm x 55m |
| Carrier | Polyethylene Coated Cloth |
| Adhesive | Synthetic Rubber |
| Total Thickness | 7 mils |
| Tensile | 17 lbs/in |
| Adhesion | 65 oz/in |
| Elongation | 12% |
| Color | Silver and Red |
STI LCI320 Fire Rated Intumescent Sealant - 20 Oz Tubes
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
SpecSeal LCI Firestop Sealant is a water-based intumescent sealant intended for a wide range of through-penetration and construction joint applications. SpecSeal LCI Sealant has excellent caulking properties making it easy to apply in vertical applications as well as overhead.
Can be purchased by individual tube; case (12 tubes); or palette (780 tubes).
- Gun Grade material
- Tested for use in through-penetration and construction joint configurations
- Compatible with CPVC Piping
- Can be sanded and painted to match its surroundings
- Used in over 500 UL Tested Systems
| Property | Value |
| Flame Spread | 0* |
| Smoke Development | 0* |
| Mold & Fungus Growth Rating (ASTM G21) | 0 |
| In Service Temperature | Less than or equal to 185°F (85°C) |
| STC Rating (ASTM E90-04/ASTM C919) | Less than or equal to 185°F (85°C) |
| VOC Content | Less than or equal to 185°F (85°C) |
| Expansion Begins | 350°F (177°C) |
| Average Volume Shrinkage (ASTM C1241) | 21.1% |
| Volume Expansion | 10x Free Expansion |
| Shelf Life From Date of Manufacture | 24 months |
| Notes | *Tested to ASTM E84 (UL723) at 14% surface coverage (modified test for sealants and caulks) **Per SCAQMD Rule 1168 (EPA Method 24) |
SpecSeal LCC Intumescent Firestop Collar
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
SpecSeal LCC Firestop Collars are factory-manufactured firestop devices sized to plastic pipes of up to 4 in. Trade Size. LCC Collars consist of a restraining collar with a factory applied intumescent ensuring the correct amount of material is applied every time. Simplify the process of firestopping combustible piping by taking the guess work out of estimation with SpecSeal LCC Firestop Collars.
Sizes available for inventory clearance pricing: 2.0″, 3.0″, and 4.0″
- Rapid expansion – closes off burning pipes quickly
- Small profile – use it in all the tight spots
- Flexible & durable – no loose flakes (eye hazards)
- Water resistant – no water soluble or hygroscopic ingredients
- Economical – lower installed cost
- High volume char – expands up to 60 times,
| Property | Value |
| Available Sizes | 2″ (51mm), 3″ (76mm), 4″ (102mm) |
| Shell Construction | Galvanized Steel |
| Expansion Begins | 320°F (160°C) |
| Volume Expansion | 32x to 64x (free expansion) |
| In Service Temperature | Less Than 120°F (49°C) |
| Shelf Life | Limit |
50 Gal. Contractor Bags
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
CWC low density garbage bags are more stretchable and give more easily than high density bags because they are made from resins that are highly resistant to puncturing and tearing. These bags offer excellent toughness and a star-seal bottom for easier weight distribution and removal.
20 bags per box.
- Color: grey
- Ideal for recycling
| Width | 32″ |
| Height | 50″ |
| Capacity | 40-45 Gallon |
| Thickness | 3 mil |
| Color | Grey |
| Units/Carton | 20 |
| Weight | 7 lbs. |
| Manufacturer | Continental Western Corporation |
Heavy Duty FORCE® SHIELD Coveralls
Priced well below retail! Hurry — available only while supplies last!*
Location: Portland
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
Heavy Duty FORCE® SHIELD Coveralls provide splash proof protection to insulation installers.
Intec’s Professional Duty Coveralls are produced from 45 gsm microporous bonded fabric and meet performance requirements for protective clothing against liquid chemicals, protective clothing for use against solid particulates, and electrostatic dissipative protection clothing.
Certifications include:
- EN ISO 13688:2013
- EN 13034:2005+ A1:2009
- EN ISO 13982-1:2004+ A1:2010
- EN 14523:2004
- EN 1149-5:2018
- EN ISO 13982-1 Type 5
- EN 13034 Type 6
- 55gsm microporous fabric
- All Intec FORCE® SHIELD coveralls are disposable
- includes hood
- includes zippered front
SALT LAKE CITY
GOMAMAX AC60 ACRYLIC LATEX CAULK
Priced well below retail! Hurry — available only while supplies last!*
Location: Salt Lake City
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
10.1 oz. tubes of Gomamax AC60 siliconized acrylic caulk. Color is white.
- Indoor / outdoor use
- Paintable
- Cures Flexible
- Easy Water Cleanup
- Great Adhesion
- Mold-Proof
- Solvent-Free
- No Bag
- Easy to Tool
- High Solids Content
- Very Low Shrinkage
Available by the tube, case (24 tubes), or palette (2,400 tubes).
GOMAMAX Gasket Seal Gun Foam
Priced well below retail! Hurry — available only while supplies last!*
Location: Salt Lake City
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
One-component ready to use polyurethane gunfoam for sealing between framed walls and drywall. Fine cell structure enhances thermal and acoustic insulation properties and provides airtight sealing.
- Improves air tightness of the construction
- Dense, consistent and flexible foam structure
- Excellent movement capability
- Very low diisocyanate monomer content (<0,1%)
- High thermal and acoustic insulation value
Fields of Application:
- Sealing between drywall and framed walls
Application Instructions
Application conditions:
Air temperature during use: 41˚F to 86˚F. Make sure the ambient temperature stays within this range until the foam has fully cured.
Can temperature during application: 50˚F to 77˚F, best results at 68˚F.
Surface preparation
Remove dust, loose particles and oil stains from the surfaces.
Application method
Shake the can vigorously at least 20 times. Hold the foam can in upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun dial and trigger pressure.
Cleaning
Uncured foam can be removed with acetone, cured foam with mechanical means.
- Gomamax Gasket Seal is designed to be applied at the top plate to create a seal between the drywall and framing to reduce air infiltration from the attic or floor above. Application between the bottom plate and drywall, or the bottom plate to the floor (replacing caulk) is an option as well.
- ACH requirements are becoming more stringent every year with new codes going into effect. Gomamax Gasket Seal will provide a better result on blower door testing when properly applied.
- Gomamax Gasket Seal has elastic properties that allow it to stay attached to the lumber when drywall is slid over it. The rebounding properties allow it to fill in small gaps between the lumber and drywall.
SPOKANE
TACOMA
GOMAMAX Gasket Seal Gun Foam
Priced well below retail! Hurry — available only while supplies last!*
Location: Tacoma
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
One-component ready to use polyurethane gunfoam for sealing between framed walls and drywall. Fine cell structure enhances thermal and acoustic insulation properties and provides airtight sealing.
- Improves air tightness of the construction
- Dense, consistent and flexible foam structure
- Excellent movement capability
- Very low diisocyanate monomer content (<0,1%)
- High thermal and acoustic insulation value
Fields of Application:
- Sealing between drywall and framed walls
Application Instructions
Application conditions:
Air temperature during use: 41˚F to 86˚F. Make sure the ambient temperature stays within this range until the foam has fully cured.
Can temperature during application: 50˚F to 77˚F, best results at 68˚F.
Surface preparation
Remove dust, loose particles and oil stains from the surfaces.
Application method
Shake the can vigorously at least 20 times. Hold the foam can in upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun dial and trigger pressure.
Cleaning
Uncured foam can be removed with acetone, cured foam with mechanical means.
- Gomamax Gasket Seal is designed to be applied at the top plate to create a seal between the drywall and framing to reduce air infiltration from the attic or floor above. Application between the bottom plate and drywall, or the bottom plate to the floor (replacing caulk) is an option as well.
- ACH requirements are becoming more stringent every year with new codes going into effect. Gomamax Gasket Seal will provide a better result on blower door testing when properly applied.
- Gomamax Gasket Seal has elastic properties that allow it to stay attached to the lumber when drywall is slid over it. The rebounding properties allow it to fill in small gaps between the lumber and drywall.
ECHOtape 1/8" x 3" Single Sided Thermal Break Tape – 75 ft. roll
Priced well below retail! Hurry — available only while supplies last!*
Location: Tacoma
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This 1/8 in. thick single-sided thermal break tape (FO-V2348) is designed to reduce thermal bridging on outer and inner framing in metal buildings. The tape has excellent holding power and high-load capability.
The most common applications include:
- create a vapor seal where large gaps occur
- create a lap joint seal on corrugated metal building panels or prefabricated wall panels
- create a flash break on building purlins and girt flanges
- maintain a seal in high movement joints
Features of the single-sided thermal break tape include:
- adheres strongly to smooth and rough surfaces (including corrugated metal)
- easy to apply
- sticks quickly (which speeds up application)
- conforms well to irregular surfaces
- easy to die-cut for custom sizing
- the paper release liner protects the adhesive from contaminants when cutting the tape to specific lengths
The tape has an acrylic adhesive.
The single-sided thermal break tape is available in gray.
The tape is most commonly used by:
- construction professionals
- building contractors
- insulation contractors
- metal building specialists
| Adhesive | Acrylic |
| Total Thickness | 1/8″ |
| Tensile | 60 PSI |
| Adhesion | 20 oz/in |
| Service Temperature | -20°F to 130°F |
| Elongation | 120% |
| Color | Gray |
| Compression Deflection | 5 PSI |
| R Value | .576 |
| Holding Power | >24 hours @ 2.2 psi load, R.T. |
ECHOtape 1/4" x 3/8" Single Sided Weather Stripping / vinyl foam tape – 50 ft. roll
Priced well below retail! Hurry — available only while supplies last!*
Location: Tacoma
*CALL NOW to confirm availability and price. All inventory clearance sales are final.
This 1/4 in. thick single-sided thermal break tape (FO-V2344) is designed to reduce thermal bridging on outer and inner framing in metal buildings. The tape has excellent holding power and high-load capability.
The most common applications include:
- create a vapor seal where large gaps occur
- create a lap joint seal on corrugated metal building panels or prefabricated wall panels
- create a flash break on building purlins and girt flanges
- maintain a seal in high movement joints
Features of the single-sided thermal break tape include:
- adheres strongly to smooth and rough surfaces (including corrugated metal)
- easy to apply
- sticks quickly (which speeds up application)
- conforms well to irregular surfaces
- easy to die-cut for custom sizing
- the paper release liner protects the adhesive from contaminants when cutting the tape to specific lengths
The tape has an acrylic adhesive.
The single-sided thermal break tape is available in gray.
The tape is most commonly used by:
- construction professionals
- building contractors
- insulation contractors
- metal building specialists
| Adhesive | Acrylic |
| Total Thickness | 1/4″ |
| Tensile | 60 PSI |
| Adhesion | 20 oz/in |
| Service Temperature | -20°F to 130°F |
| Elongation | 120% |
| Color | Gray |
| Compression Deflection | 5 PSI |
| R Value | 1.15 |
| Holding Power | >24 hours @ 2.2 psi load, R.T. |
BECOME A PERFORMANCE PRO SUPPLY CUSTOMER
Get loyalty pricing, access to training, and unbeatable service. Sign up today!